3DPEGBOARD BOX MAKER
SKÅDIS-compatible · Free STL maker

Enter dimensions.Make the box.

Enter the space you need. Hook count and outer dimensions are calculated automatically, and the printable STL is made in your browser.

Start making
FOUR SIMPLE STEPS

Measure, set, check, download.

  1. 01Measuring an object with calipersMeasure the item

    Check the inside space you need.

  2. 02Storage box with dividersSet size and dividers

    Outer size and hook count are automatic.

  3. 03Mounting the box to a pegboardCheck the 3D model

    Inspect the hooks and stabilizer pins.

  4. 04Downloading the STL from a browserDownload and print

    The model is generated in your browser.

BOX SETTINGS

Set the inside size

Changes are saved on this device.
Dimension type

Enter the clear inside size you need. Outside size is calculated automatically.

Body outside size: 123.2 × 90.6 × 66.6 mm

Type any value directly. Slider ranges expand to match it.

Hooks grow directly from the 4.0 mm back, keeping a 4.8 mm section and rounded bend. A wider root spreads load into the back.

DividersCombine width and depth dividers
×＝ 1 space

Enter 2 to split in half. Fine-tune positions in the top view.

Advanced settings Open

Walls & bottom

1.6 mm: suitable for ordinary small-item storage

Removes the floor and keeps the four walls. Useful for surrounding an item on a desk or routing cables underneath.

Hooks

Hook position
Hooks grow directly from the back and do not rise above the box. Requires 22 mm height.

4.0 mm is the PLA default. The whole back supports the hooks without bulging into the box or board side; inside size stays unchanged.

For a 5 mm slot, hook width is 3.7 mm (1.3 mm total side clearance). Reach for a 5 mm board is 5.3 mm.

Apply your fit-gauge result

Choose the best slot-width value and board-thickness value from the gauge.

Slot
Board

Current fit: slot 0.7 / board 0.3. Fine-tune the numeric fields above.

Measured reference: slots about 5 × 15 mm, board about 5 mm, vertical pitch 40 mm. 10 mm hooks and lower stabilizer pins are placed automatically.

Material
Default material. Easy to size accurately, but avoid heat and long-term heavy loads.

PLA uses no global scale correction. Default hook width is 3.7 mm with a 4.8 mm section. Confirm final fit with the gauge.

5 perimeters, 0.2 mm layers. Enable support beneath the hooks.

Shape

3D PREVIEW Ready
Drag to rotate · Scroll to zoom
3 hooks + stabilizer pins · from back
INSIDE120×85×65mm
VOLUME0.66L
GRID1 × 11
HOOKS3
USELight itemsTest first
OUTSIDE SIZE123.2×90.6×66.6 mmIncluding hooks: 123.2×100.7×66.6 mm

✓Made entirely in your browser No CAD software or conversion step is needed.
01Check fit firstBoards, coatings, and printers all vary slightly.
02Thick, rounded hooksA 4.8 mm section and rounded bend improve strength; lower pins reduce wobble.
03Start lightLoad capacity is not certified. Boxes over 100 mm deep put extra force on the hooks.

Generation stays on your device; dimensions are not sent. Do not use for food contact, heavy loads, or anything involving the safety of people or animals.

Use and safety

STLs you create may be used personally or commercially. Test with light items first and never use the result where people or animals depend on it for safety.

GuideTermsPrivacyLicenses
Inside120×85×65mm